Machine embroidery with metallic thread
Posted By admin on July 31, 2010
Metallic thread tends to be quite aggravating to use, should you be continuously having thread breaks it is extremely aggravating and can result in your project taking a lot longer to complete than you had planned. Below are a few tips on methods to reduce the thread breaks when embroidery design downloads with metallic thread. Be sure you are choosing top quality, well looked after metallic thread. If you work with cheap, old or dried out thread it’ll break more frequently, check that the thread is smooth by running through your fingers. You should always slow the machine down if you are using metallic thread. It’ll actually save you time since you won’t need to consistently cope with thread breaks.
Choose a design that is made for stitching in metallic thread. If theembroidery design downloads was digitized for metallic thread the creator could have suggested a specific make of thread. Ensure you are using the right size needle for your thread and that the needle is in good condition, if your metallic thread is a bit thicker than regular thread you’ll need to use a bigger needle.
Because metallic embroidery thread kinks and coils much more than standard thread this creates added tension while it passes through the thread guide, this could cause shredding and breakage. The use of a thread stand which is designed to smooth the thread can be helpful. Heavy stiff tightly woven fabric and stabilizers are not recommended when using metallic thread since they can remove the metallic layer from the thread.Check your machine tension; Make sure your thread tension is not to tight. Be sure you have no rough edges or burs on needles as well as the needle plate.Avoid sticky backing or adhesives, the adhesive can build-up on the needle and create drag which hinders smooth sewing
Comments
Leave a Reply